Gamepad BEITONG Asura 2 Pro Plus NearLink

BEITONG Asura 2 Pro Plus NearLink

Test Status:Verified
Compatible: AndroidiOSLinuxPC
Interfaces: BluetoothCableDongle
Release date: 12 February 2024
Price: $89.99, find on: amzn.to, aliexpress.com
User experience surveys
To participate in the survey, you need to !

BEITONG Asura 2 Pro Plus NearLink input lag comparison

#ConnectionMode
Min.Latency
AverageLatency (ms)
Max.Latency
Polling rate Jitter
OSBuild ver.
FWTester ver.
BEITONG Asura 2 Pro Plus NearLink - Sticks Latency (GPDL method)
1
DongleDinput10.9715.3921.72189.8 of 250 Hz 2.16
Win 11
10.0.22631
1.0.4
3.0.92
2
DongleSwitch11.9719.5427.7877.06 of 125 Hz 3.81
Win 11
10.0.22631
1.0.4
3.0.92
3
DongleXinput22.1325.8636.681991.63 Hz 2.04
Win 11
10.0.22631
1.0.4
3.0.92
4
CableDinput5.737.9610.46258.17 of 250 Hz 1.17
Win 11
10.0.22631
1.0.4
3.0.92
5
CableSwitch15.8923.1230.3471.33 of 125 Hz 3.95
Win 11
10.0.22631
1.0.4
3.0.92
6
CableXinput14.8918.1828.61983.07 Hz 2.04
Win 11
10.0.22631
1.0.4
3.0.92
BEITONG Asura 2 Pro Plus NearLink - Button Latency (GPDL method)
7
DongleDinput16.4922.8630.45189.8 of 250 Hz 2.97
Win 11
10.0.22631
1.0.4
3.0.92
8
DongleSwitch12.8421.1129.6377.06 of 125 Hz 4.09
Win 11
10.0.22631
1.0.4
3.0.92
9
DongleXinput16.9722.2228.551991.63 Hz 2.62
Win 11
10.0.22631
1.0.4
3.0.92
10
CableDinput5.689.2714.31258.17 of 250 Hz 1.48
Win 11
10.0.22631
1.0.4
3.0.92
11
CableSwitch7.5715.0623.5971.33 of 125 Hz 4.12
Win 11
10.0.22631
1.0.4
3.0.92
12
CableXinput8.8514.2722.651983.07 Hz 2.62
Win 11
10.0.22631
1.0.4
3.0.92
BEITONG Asura 2 Pro Plus NearLink - Polling Rate
13
DongleDinput0.15 *5.27 *10.05 *189.8 of 250 Hz 2.22
Win 11
10.0.22631
1.0.4
1.1.9
14
DongleSwitch11.78 *12.98 *14.76 *77.06 of 125 Hz 0.37
Win 11
10.0.22631
1.0.4
1.1.9
15
DongleXinput0.38 *0.5 *0.72 *1991.63 Hz 0.04
Win 11
10.0.22631
1.0.4
1.1.9
16
CableDinput0.17 *3.87 *4.63 *258.17 of 250 Hz 0.66
Win 11
10.0.22631
1.0.4
1.1.9
17
CableSwitch12.99 *14.02 *15.37 *71.33 of 125 Hz 0.72
Win 11
10.0.22631
1.0.4
1.1.9
18
CableXinput0.35 *0.5 *0.84 *1983.07 Hz 0.06
Win 11
10.0.22631
1.0.4
1.1.9
19
BluetoothSwitch0.17 *19.5 *44.91 *51.29 of 125 Hz 8.38
Win 11
10.0.22631
1.0.4
1.1.9
20
BluetoothXinput9.01 *20.82 *36.83 *48.04 of 125 Hz 5.49
Win 11
10.0.22631
1.0.4
1.1.9
*Note: Latency with an asterisk are based on polling rate and do not represent actual input-lag.
More information

Latency

This chart shows how quickly your gamepad responds to button presses as well as joystick deviation. Each point on the graph represents a test result.

  • The horizontal axis (X-axis) measures the time elapsed from the button press or stick deflection to the game's response. This time is called “latency”.
  • The vertical axis (Y-axis) shows how often we got such a result, in percentages.

If you hover over a point on the graph, you'll see how long the latency was and how often it occurred.

The lower the latency, the better. In a perfect world, as soon as you press a button or move the joystick on a gamepad, the action in the game happens instantly. If there is a long delay, you can press the button, but the action will take some time. In fast-paced games where every second counts, a long delay can be a problem.

Use this chart to figure out how fast your gamepad reacts.

Polling rate

The polling rate (also known as the Refresh intervals) in gamepads refers to how often the controller sends input information to the console or computer. It's measured in Hertz (Hz), which translates to the number of times per second the device reports its status to the computer.

For example, a gamepad with a polling rate of 125 Hz sends its status to the computer 125 times per second, or every 8 milliseconds.

The polling rate is essential in gaming for two reasons:

  1. Responsiveness: A higher polling rate means the controller communicates its state to the computer more frequently, resulting in faster and more responsive gameplay. In fast-paced or competitive games, even a slight increase in responsiveness can give players an advantage.

  2. Accuracy: A higher polling rate can also increase the accuracy of the controller. This is particularly important for devices like gaming mice, where precise movements can be critical, but it can also impact gamepads, especially in games that require accurate inputs.

However, it's important to note that a higher polling rate can also put more strain on the computer's CPU, as it needs to process inputs more frequently. Moreover, beyond a certain point, increases in polling rate may not yield noticeable improvements due to limitations in human reaction time and display refresh rates.

Jitter

Jitter is a measure of how much the gamepad's latency varies during testing. It is calculated as the standard deviation of the recorded delay times. A lower jitter value indicates more consistent latency, while a higher jitter suggests unstable performance. Low jitter is important for a smooth, responsive gaming experience.

Stick test of BEITONG Asura 2 Pro Plus NearLink

Inner Dead Zone

The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.

Gamepad BEITONG Asura 2 Pro Plus NearLink has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.

Outer Dead Zone

The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.

The outer deadzones of the BEITONG Asura 2 Pro Plus NearLink gamepad has a noticeable size (0.8mm) that partially limits the useful travel area of the stick.

Stick Resolution

The stick resolution of the BEITONG Asura 2 Pro Plus NearLink gamepad has a motion resolution of 0.0001. This means that it can register 10000 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.

It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.

Asymmetry Index

The Asymmetry Index measures the difference in the left-right and up-down deflection of the joystick. A higher difference indicates worse joystick movement. The largest difference in the X and Y axis deflection is selected as the index. This indicator helps to understand the joystick's performance during small, precise movements that are critical for aiming and typically use 25-60% of the joystick's range of motion.

The asymmetry index of the BEITONG Asura 2 Pro Plus NearLink gamepad is 4.3% for the left stick and 4.8% for the right stick.
Learn more about how the measurements are made.

Circle Error

The "Circle Error" parameter determines the behavior of the stick at its extreme diagonal positions. With the Joystick Tester program, you can check how accurately the gamepad stick draws a circle in its movement. The lower the error value, the better. The BEITONG Asura 2 Pro Plus NearLink gamepad has 0.1% left circle error, and 0.1% right circle error.

Central Accuracy

The stick centering parameter indicates how well the stick returns to the central position after the player releases it. This characteristic is responsible for stick drift: the lower the Central Accuracy value, the better. The average worst position at which the joystick stops is taken as a measurement and is not touched.

In the case of the BEITONG Asura 2 Pro Plus NearLink, the Central Accuracy for the left joystick is 1.1%, and 2% for the right stick.

Disclaimer

All conclusions of the BEITONG Asura 2 Pro Plus NearLink gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.

Tested on firmware: 1.0.4, by John Punch

Inner Dead Zone

The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.

Gamepad BEITONG Asura 2 Pro Plus NearLink has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.

Outer Dead Zone

The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.

The outer deadzones of the BEITONG Asura 2 Pro Plus NearLink gamepad has a noticeable size (0.8mm) that partially limits the useful travel area of the stick.

Stick Resolution

The stick resolution of the BEITONG Asura 2 Pro Plus NearLink gamepad has a motion resolution of 0.0001. This means that it can register 10000 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.

It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.

Asymmetry Index

The Asymmetry Index measures the difference in the left-right and up-down deflection of the joystick. A higher difference indicates worse joystick movement. The largest difference in the X and Y axis deflection is selected as the index. This indicator helps to understand the joystick's performance during small, precise movements that are critical for aiming and typically use 25-60% of the joystick's range of motion.

The asymmetry index of the BEITONG Asura 2 Pro Plus NearLink gamepad is 4.1% for the left stick and 4.3% for the right stick.
Learn more about how the measurements are made.

Circle Error

The "Circle Error" parameter determines the behavior of the stick at its extreme diagonal positions. With the Joystick Tester program, you can check how accurately the gamepad stick draws a circle in its movement. The lower the error value, the better. The BEITONG Asura 2 Pro Plus NearLink gamepad has 0.1% left circle error, and 0.2% right circle error.

Central Accuracy

The stick centering parameter indicates how well the stick returns to the central position after the player releases it. This characteristic is responsible for stick drift: the lower the Central Accuracy value, the better. The average worst position at which the joystick stops is taken as a measurement and is not touched.

In the case of the BEITONG Asura 2 Pro Plus NearLink, the Central Accuracy for the left joystick is 0.8%, and 2% for the right stick.

Disclaimer

All conclusions of the BEITONG Asura 2 Pro Plus NearLink gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.

Tested on firmware: 1.0.4, by John Punch

Inner Dead Zone

The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.

Gamepad BEITONG Asura 2 Pro Plus NearLink has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.

Outer Dead Zone

The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.

The outer deadzones of the BEITONG Asura 2 Pro Plus NearLink gamepad has a noticeable size (0.8mm) that partially limits the useful travel area of the stick.

Stick Resolution

The stick resolution of the BEITONG Asura 2 Pro Plus NearLink gamepad has a motion resolution of 0.0078. This means that it can register 128 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.

It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.

Asymmetry Index

The Asymmetry Index measures the difference in the left-right and up-down deflection of the joystick. A higher difference indicates worse joystick movement. The largest difference in the X and Y axis deflection is selected as the index. This indicator helps to understand the joystick's performance during small, precise movements that are critical for aiming and typically use 25-60% of the joystick's range of motion.

The asymmetry index of the BEITONG Asura 2 Pro Plus NearLink gamepad is 3.1% for the left stick and 0.8% for the right stick.
Learn more about how the measurements are made.

Circle Error

The "Circle Error" parameter determines the behavior of the stick at its extreme diagonal positions. With the Joystick Tester program, you can check how accurately the gamepad stick draws a circle in its movement. The lower the error value, the better. The BEITONG Asura 2 Pro Plus NearLink gamepad has 0.3% left circle error, and 0.4% right circle error.

Central Accuracy

The stick centering parameter indicates how well the stick returns to the central position after the player releases it. This characteristic is responsible for stick drift: the lower the Central Accuracy value, the better. The average worst position at which the joystick stops is taken as a measurement and is not touched.

In the case of the BEITONG Asura 2 Pro Plus NearLink, the Central Accuracy for the left joystick is 1.2%, and 2% for the right stick.

Disclaimer

All conclusions of the BEITONG Asura 2 Pro Plus NearLink gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.

Tested on firmware: 1.0.4, by John Punch

Inner Dead Zone

The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.

The BEITONG Asura 2 Pro Plus NearLink has an inner deadzones. It is large enough to significantly affect the control of micro movements.

Outer Dead Zone

The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.

The outer deadzones of the BEITONG Asura 2 Pro Plus NearLink gamepad has a noticeable size (0.8mm) that partially limits the useful travel area of the stick.

Stick Resolution

The stick resolution of the BEITONG Asura 2 Pro Plus NearLink gamepad has a motion resolution of 0.0078. This means that it can register 128 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.

It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.

Asymmetry Index

The Asymmetry Index measures the difference in the left-right and up-down deflection of the joystick. A higher difference indicates worse joystick movement. The largest difference in the X and Y axis deflection is selected as the index. This indicator helps to understand the joystick's performance during small, precise movements that are critical for aiming and typically use 25-60% of the joystick's range of motion.

The asymmetry index of the BEITONG Asura 2 Pro Plus NearLink gamepad is 3.2% for the left stick and 4% for the right stick.
Learn more about how the measurements are made.

Circle Error

The "Circle Error" parameter determines the behavior of the stick at its extreme diagonal positions. With the Joystick Tester program, you can check how accurately the gamepad stick draws a circle in its movement. The lower the error value, the better. The BEITONG Asura 2 Pro Plus NearLink gamepad has 0.3% left circle error, and 0.4% right circle error.

Central Accuracy

The stick centering parameter indicates how well the stick returns to the central position after the player releases it. This characteristic is responsible for stick drift: the lower the Central Accuracy value, the better. The average worst position at which the joystick stops is taken as a measurement and is not touched.

In the case of the BEITONG Asura 2 Pro Plus NearLink, the Central Accuracy for the left joystick is 0.4%, and 0.4% for the right stick.

Disclaimer

All conclusions of the BEITONG Asura 2 Pro Plus NearLink gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.

Tested on firmware: 1.0.4, by John Punch

Inner Dead Zone

The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.

The BEITONG Asura 2 Pro Plus NearLink has an inner deadzones. It is large enough to significantly affect the control of micro movements.

Outer Dead Zone

The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.

The outer deadzones of the BEITONG Asura 2 Pro Plus NearLink gamepad has a noticeable size (0.8mm) that partially limits the useful travel area of the stick.

Stick Resolution

The stick resolution of the BEITONG Asura 2 Pro Plus NearLink gamepad has a motion resolution of 0.0078. This means that it can register 128 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.

It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.

Asymmetry Index

The Asymmetry Index measures the difference in the left-right and up-down deflection of the joystick. A higher difference indicates worse joystick movement. The largest difference in the X and Y axis deflection is selected as the index. This indicator helps to understand the joystick's performance during small, precise movements that are critical for aiming and typically use 25-60% of the joystick's range of motion.

The asymmetry index of the BEITONG Asura 2 Pro Plus NearLink gamepad is 4% for the left stick and 5.5% for the right stick.
Learn more about how the measurements are made.

Circle Error

The "Circle Error" parameter determines the behavior of the stick at its extreme diagonal positions. With the Joystick Tester program, you can check how accurately the gamepad stick draws a circle in its movement. The lower the error value, the better. The BEITONG Asura 2 Pro Plus NearLink gamepad has 0.3% left circle error, and 0.3% right circle error.

Central Accuracy

The stick centering parameter indicates how well the stick returns to the central position after the player releases it. This characteristic is responsible for stick drift: the lower the Central Accuracy value, the better. The average worst position at which the joystick stops is taken as a measurement and is not touched.

In the case of the BEITONG Asura 2 Pro Plus NearLink, the Central Accuracy for the left joystick is 0.4%, and 0.4% for the right stick.

Disclaimer

All conclusions of the BEITONG Asura 2 Pro Plus NearLink gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.

Tested on firmware: 1.0.4, by John Punch

Comparison of BEITONG Asura 2 Pro Plus NearLink latency with other

BEITONG Asura 2 Pro Plus NearLink specifications

Platforms

Android, IOS, Linux, Macos, Windows

Internal

Mechanical buttons
Yes
(100%)
Sticks type
Hall
(100%)

External

Back buttons
2
(100%)
Button layout
Xbox
(100%)
Joystick positioning
Asymmetric
(100%)
Rubberized handles
No
(100%)
Swappable layout
No
(100%)
Trigger lock
No
(100%)

Features

Analog triggers
Analog
(100%)
Gyroscope function
Yes
(100%)
NFC support
No
(100%)
Switch Wake Up
No
(100%)
Trigger vibration
No
(100%)

Connection

Dongle
Dinput, Switch, Xinput
Cable
Dinput, Switch, Xinput
Bluetooth
Switch, Xinput
USB interface
Type-C
(100%)

Software

Firmware support
Yes
(100%)
Macros option
Yes
(100%)
No dead zone mode
Yes
(100%)
PC softwre
Yes
(100%)
Results based on answers from 1 users. Want to contribute? Join our questions survey!
User avatar

Users' opinion

Add
To add an opinion, you need to be !
No opinions have been added yet. Will you be the first?