Machenike G6 Pro
Machenike G6 Pro input lag comparison
| # | Connection | Mode | Min.Latency | AverageLatency (ms) | Max.Latency | Polling rate | Jitter | OSBuild ver. | FWTester ver. | Machenike G6 Pro - Polling Rate |
|---|---|---|---|---|---|---|---|---|---|---|
|
1
| Dongle | Xinput | 1 * | 2 * | 3 * | 499.07 of 500 Hz | 0.31 | Win 11 10.0.22635 |
1.1.5 1.1.5 |  |
|
2
| Cable | Xinput | 0.99 * | 1.05 * | 2 * | 952.55 of 1000 Hz | 0.16 | Win 11 10.0.22635 |
1.1.5 1.1.5 | |
Other tests
| # | Connection | Mode | Min.Latency | AverageLatency (ms) | Max.Latency | Polling rate | Jitter | OSBuild ver. | FWTester ver. | Machenike G6 Pro - Button Latency (GPDL method) |
|---|---|---|---|---|---|---|---|---|---|---|
|
3
| Dongle | Xinput | 16.84 | 22.59 | 29.03 | 2000 Hz | 2.73 | Win 11 10.0.22631 |
1.0.1 2.1.8 |  | Machenike G6 Pro - Polling Rate |
|
4
| Dongle | Xinput | 0.51 * | 1.03 * | 1.52 * | 969.9 of 1000 Hz | 0.12 | Win 11 10.0.22631 |
1.0.2 1.1.5 |  |
|
5
| Dongle | Xinput | 0.57 * | 1.03 * | 1.62 * | 968.34 of 1000 Hz | 0.15 | Win 11 10.0.22631 |
1.0.2 1.1.5 | |
|
6
| Dongle | Xinput | 0.56 * | 1.04 * | 1.64 * | 965.4 of 1000 Hz | 0.15 | Win 11 10.0.22631 |
1.0.2 1.1.5 | |
|
7
| Dongle | Xinput | 0.57 * | 1.04 * | 1.66 * | 960.81 of 1000 Hz | 0.15 | Win 11 10.0.22631 |
1.0.2 1.1.5 | |
|
8
| Cable | Xinput | 1 * | 1.21 * | 7.01 * | 823.06 of 1000 Hz | 0.61 | Win 10 10.0.19045 |
1.0.23 1.1.5 |  |
Latency
This chart shows how quickly your gamepad responds to button presses as well as joystick deviation. Each point on the graph represents a test result.
- The horizontal axis (X-axis) measures the time elapsed from the button press or stick deflection to the game's response. This time is called “latency”.
- The vertical axis (Y-axis) shows how often we got such a result, in percentages.
If you hover over a point on the graph, you'll see how long the latency was and how often it occurred.
The lower the latency, the better. In a perfect world, as soon as you press a button or move the joystick on a gamepad, the action in the game happens instantly. If there is a long delay, you can press the button, but the action will take some time. In fast-paced games where every second counts, a long delay can be a problem.
Use this chart to figure out how fast your gamepad reacts.
Polling rate
The polling rate (also known as the Refresh intervals) in gamepads refers to how often the controller sends input information to the console or computer. It's measured in Hertz (Hz), which translates to the number of times per second the device reports its status to the computer.
For example, a gamepad with a polling rate of 125 Hz sends its status to the computer 125 times per second, or every 8 milliseconds.
The polling rate is essential in gaming for two reasons:
-
Responsiveness: A higher polling rate means the controller communicates its state to the computer more frequently, resulting in faster and more responsive gameplay. In fast-paced or competitive games, even a slight increase in responsiveness can give players an advantage.
-
Accuracy: A higher polling rate can also increase the accuracy of the controller. This is particularly important for devices like gaming mice, where precise movements can be critical, but it can also impact gamepads, especially in games that require accurate inputs.
However, it's important to note that a higher polling rate can also put more strain on the computer's CPU, as it needs to process inputs more frequently. Moreover, beyond a certain point, increases in polling rate may not yield noticeable improvements due to limitations in human reaction time and display refresh rates.
Jitter
Jitter is a measure of how much the gamepad's latency varies during testing. It is calculated as the standard deviation of the recorded delay times. A lower jitter value indicates more consistent latency, while a higher jitter suggests unstable performance. Low jitter is important for a smooth, responsive gaming experience.
Stick test of Machenike G6 Pro
- SwitchRAWFW: 1.37
- XinputRAWFW: 1.37
- XinputRAWFW: 1.37
- SwitchRAWFW: 1.37
- XinputRAWFW: 1.37
- XinputRAWFW: 1.37
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
The Machenike G6 Pro gamepad has a slight inner deadzones that does not significantly affect the controls.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The outer deadzones of the Machenike G6 Pro gamepad has a noticeable size that partially limits the useful travel area of the stick.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0068. This means that it can register 147 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
Gamepad Machenike G6 Pro has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The Machenike G6 Pro gamepad has normal external stick dead zones . Its significant presence does not limit the range of motion and does not have a negative impact on control.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0068. This means that it can register 147 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
- Inner DeadZonenone
- Stick Resolution2000
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
Gamepad Machenike G6 Pro has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The Machenike G6 Pro gamepad has normal external stick dead zones . Its significant presence does not limit the range of motion and does not have a negative impact on control.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0005. This means that it can register 2000 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
The Machenike G6 Pro gamepad has a slight inner deadzones that does not significantly affect the controls.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The outer deadzones of the Machenike G6 Pro gamepad has a noticeable size that partially limits the useful travel area of the stick.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0068. This means that it can register 147 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
Gamepad Machenike G6 Pro has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The Machenike G6 Pro gamepad has normal external stick dead zones . Its significant presence does not limit the range of motion and does not have a negative impact on control.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0068. This means that it can register 147 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
- Inner DeadZonenone
- Stick Resolution2000
What is RAW mode
This is a mode in which the gamepad settings disable the correction of sticks and dead zones. Not all gamepads support this mode.
Inner Dead Zone
The inner dead zone is an important parameter for stick control. It helps avoid drift or accidental movement, but if this zone is larger than the necessary minimum, it can significantly impact aiming accuracy in games. Therefore, it is better when the inner dead zone is minimal or absent.
Gamepad Machenike G6 Pro has no inner deadzones, which has which has a positive effect on aiming accuracy and micro control.
Outer Dead Zone
The outer dead zone indicates the extent to which there is an area where stick movement is not registered when fully deflected. If it's small, it indicates high stick calibration accuracy. In the case of a large outer dead zone, it significantly limits the useful range of motion and can have a negative impact on control.
The Machenike G6 Pro gamepad has normal external stick dead zones . Its significant presence does not limit the range of motion and does not have a negative impact on control.
Stick Resolution
The stick resolution of the Machenike G6 Pro gamepad has a motion resolution of 0.0005. This means that it can register 2000 positions from the center point of the stick to its outermost edge. This is similar to the resolution of a monitor, where more pixels provide a clearer image. In the case of gamepad sticks, higher resolution ensures smoother and more precise control. As a rule, 125 positions are more than enough for a comfortable game.
It is important to know that some gamepads do not have a constant resolution and give out 0.0078 or 0.0150 (for example). Therefore, the number of end positions may differ from the real ones.
Disclaimer
All conclusions of the Machenike G6 Pro gamepad are based on a single gamepad, which does not rule out the possibility that other units of this model may perform better or worse. However, this variation is usually insignificant. The test data was obtained using Joystick Tester program, and some parameters may differ in other programs.
Comparison of Machenike G6 Pro latency with other
Machenike G6 Pro specifications
Platforms
Internal
External
Features
Connection
Software
